İnşaat Mühendisliği Bölümü Koleksiyonu

Permanent URI for this collectionhttps://hdl.handle.net/20.500.11779/1943

Browse

Now showing 1 - 20 of 62

The Flipped Approach To Higher Education Designing Universities for Today's Knowledge Economies and Societies Preface
(Emerald Group Publishing Ltd, 2016) Sahin, Muhammed; Kurban, Caroline Fell
Seismic Performance of Damaged Code-Conforming Rc Columns Repaired With Sustainable Structural Mortar
(Elsevier B.V., 2024) Kolemenoglu, S.; Halici, O.F.; Demir, C.; Aydemir, C.; Aydemir, M.E.; Ilki, A.
Examining the seismic performance of damaged reinforced concrete (RC) structures after repair applications is vital for an effective post-earthquake disaster management policy. However, the number of experimental studies investigating the seismic behavior of repaired RC members is insufficient, especially for structural members that have endured slight or moderate level damages. In this study, four identical large-scale code-conforming RC columns were tested under combined effects of axial load and reversed cyclic lateral displacements. The reference column was tested until failure, while the remaining three columns were first imposed to lateral displacements until the formation of damages at different levels, then repaired with structural repair mortar that contains recycled raw materials without removing axial load and tested again until failure. The primary objectives of the experimental program are to enhance the knowledge on the post-earthquake performance of damaged RC columns and to investigate the effects of repair applications after slight and moderate damage levels. This paper provides details on the effectiveness of the aforementioned repair technique on the seismic performance of code-complying RC columns damaged at different damage levels. © 2024 Elsevier B.V.. All rights reserved.
Reconnaissance and Discussion on Ground Motion Induced by the 2023 Türkiye-Syria Earthquake
(Taylor and Francis Ltd., 2025) Towhata, I.; Çağlayan, P.Ö.; Tönük, G.; Erginağ, U.C.; Sendir Torisu, S.
This paper discusses the output from the damage reconnaissance conducted after the 2023 Türkiye-Syria earthquake. First, a large landslide occurred in a limestone gentle slope without much ground water. Second, the ground subsidence in the coastal area does not comply the the local soil conditions and other observed post-seismic situations. Third, the acceleration records exhibit stronger motion with longer period and shorter duration towards the western end of the causative fault and suggest supershear rupture. To understand these features of the ground motion, this paper proposes a hypothetical model that can reproduce these observations to a good extent. © 2025 Taylor & Francis Group, LLC.
An Overview on the Structural Monitoring, Assessment and Retrofitting of Historical Structures With a Focus on 13th Century Monuments
(Springer international Publishing Ag, 2024) Ilki, Alper; Inci, Pinar; Halici, Omer F.; Demir, Cem; Comert, Mustafa; Kuran, Fikret
Monumental historical structures affirm natural and cultural identity and hence they should be transmitted to future generations. The protection and preservation of these structures against aging and natural hazards, particularly seismic actions, requires a comprehensive approach including diagnosis of the present condition of the structure and enhancement of structural capacity for disaster mitigation, if necessary. It is obvious that due to their historical values, any attempt towards the preservation of the monumental historical structures must be carried out with respect to the principles of integrity and authenticity. In this study, the structural performance assessment procedures, implementation of structural health monitoring systems and seismic strengthening strategies are discussed and described with reference to 13th-century monumental historical structures in Turkiye. The structural engineering aspects of recent activities for the restoration and preservation of the Great Mosque and Hospital of Divrigi (a world heritage listed structure) and Sivas Ulu Cami (Mosque) Minaret are briefly presented. In light of the structural analysis and monitoring results, recommendations for interventions to these monumental structures are outlined.
Investigation Procedure for the Diagnosis of Historical Minarets: Inclined Minaret of Sivas Ulu Cami (mosque)
(Springer, 2024) İnci, Pınar; Demir, Cem; Aldırmaz B.; Çoban S.; Halıcı, Ömer Faruk; Cömert M.; Kiraz F.
The inclined minaret of Sivas Ulu Cami (Mosque) from the 13th century Danishmend Period is one of the most invaluable architectural heritages in Turkey. The extent of inclination of the minaret towards the North-West direction, the seismicity of the region, and structural damages that occurred in time have emphasized the need for comprehensive structural and geotechnical investigations. Accordingly, a rehabilitation project is currently going on under the coordination of the General Directorate of Foundations of Turkey. Within the scope of the project, first, a series of field surveys have been conducted to obtain the current features of the minaret including the characteristics of the structural system, damages, deviation from the vertical axis, ground conditions and foundation details. In addition to that, a monitoring system including inclinometers, linear potentiometers and accelerometers has been mounted for tracking the evolution of deformations and damages in time under environmental influences and extracting the dynamic properties of the minaret. Findings from the field survey and monitoring system were used for constructing an analytical model of the structural system of the minaret. Then nonlinear time history analyses were conducted under various strong ground motion records to estimate the seismic performance of the minaret when subjected to earthquakes of different characteristics. The results showed that the tensile stresses that occurred due to seismic actions exceeded the tensile strength of the brick masonry at the region of the transition segment and the cylindrical body (top level of the boot).
Site Response Analysis in Performance Based Approach
(Elsevier Sci Ltd, 2024) Ansal, Atilla; Tönük, Gökçe; Sadeghzadeh, Shima
A performance based approach for site response analysis requires a probabilistic approach accounting for the observed variability in soil stratification and engineering properties of the soil layers. The major variability in site-specific response analysis arises from the uncertainties induced by the (a) local seismic hazard assessment, (b) selection and scaling of the hazard compatible input earthquake time histories, (c) soil stratification and engineering properties of encountered soil and rock layers, and (d) method of site response analysis. Even though the uncertainties related to first item, local seismic hazard assessment, has primary importance on the outcome of the site-specific response analyses, the discussion in this article focuses on the possible uncertainties in selection and scaling of the hazard compatible input earthquake time histories, soil stratification, thickness, type and their engineering properties, depth of ground water table and bedrock and properties of the engineering bedrock. One alternative may be to conduct site response analyses for large number of soil profiles generated by Monte Carlo simulations using relatively large number of hazard compatible acceleration time histories to assess probabilistic performance based design acceleration spectra and acceleration time histories calculated on the ground surface with respect to different performance levels. A remaining issue may be considered as the variability induced by 1D, 2D, and 3D site response analysis.
Probabilistic Seismic Microzonation for Ground Shaking Intensity, a Case Study in Türkiye
(Springer, 2023) Tönük, Gökçe; Ansal, Atilla
The purpose of seismic microzonation is to estimate earthquake characteristics on the ground surface based on a probabilistic approach to mitigate earthquake damage in the foreseeable future for the new buildings, as well as for the existing building stock. The probabilistic analysis and related results are very important from an engineering perspective since the nature of the problem can only be dealt with in a probabilistic manner. The uncertainties associated with these analyses may be large due to the uncertainties in source characteristics, soil profile, soil properties, and building inventory. At this stage, the probability distribution of the related earthquake parameters on the ground surface may be determined based on hazard-compatible input acceleration-time histories, site profiles, and dynamic soil properties. One option, the variability in earthquake source and path effects may be considered using a large number of acceleration records compatible with the site-dependent earthquake hazard. Likewise, large numbers of soil profiles may be used to account for the site-condition variability. The seismic microzonation methodology is proposed based on the probabilistic assessment of these factors involved in site response analysis. The second important issue in seismic microzonation procedure is the selection of microzonation parameters. The purpose being mitigation of structural damage, it is possible to adopt earthquake parameters like cumulative average velocity (CAV) or Housner intensity (HI) that was observed to have better correlation with building damage after earthquakes. A seismic microzonation procedure will be developed with respect to ground shaking intensity considering probabilistic values of the cumulative average velocity (CAV) or Housner intensity (HI).
Numerical Seismic Performance Investigation of Aac Infill Walls With Flat-Truss Bed-Joint Reinforcement
(National Technical University of Athens, 2023) İlki, Alper; Halıcı, Ömer Faruk
Autoclaved Aerated Concrete (AAC) is a lightweight, energy-efficient and easy-to-transport material. As a result, AAC walls are becoming increasingly common as an infill solution in earthquake-prone areas such as Turkey, Italy, and Greece. Although infills are considered as secondary components in seismic design, they are extremely vulnerable to damage during earthquakes along both in-plane (IP) and out-of-plane (OOP) directions. Previous post-earthquake site examinations revealed that the failure of infill walls can result in serious injuries and casualties. Furthermore, huge economic losses as well as disruption in the functionality of essential buildings that are supposed to be operational after earthquakes may adversely affect the daily life in the earthquake-affected regions. One of the potential methods for increasing the seismic resilience of infill walls is use of bed-joint reinforcement between infill courses. In this paper, the general approaches in the establishment of the numerical finite element model for infill walls with and without bed-joint reinforcement are presented. The developed model was evaluated according to the previous full-scale experimental test results from strength and damage propagation point of view. The model will be used to investigate the response of infills with various bed-joint reinforcement amounts and height-to-length ratios to generalize the seismic performance improvements obtained by the use of flat-truss reinforcement both in the IP and OOP directions.
Deprem Yalıtımlı ve Geleneksel Binalarda Tesisatlar İçin Sismik Koruma Hesabı ve Gereksinimi
(2023) Şadan, Bahadır
İnşaat mühendisleri, olası büyük bir deprem senaryosu için, binanın taşıyıcı elemanlarını ve içinde yaşayan insanların can güvenliğini sağlamak için tasarım yapmaktadırlar. Halbu - ki, büyük bir deprem sonrası mali kayıp tabloları incelendiğinde, mali kayıpların en büyük bölümünü yapısal olmayan elemanlardaki hasarın oluşturduğunu görebiliriz. Dışarıdan bakıldığında hasarsız gözüken, taşıyıcı elemanlarında hasar olmayan bir binanın içerisine girildiğinde, sadece kendi ağırlığını taşımak için askılanmış ve doğru sismik koruma uygulan- mamış tesisatların, tavaların ve diğer tavana asılı ekipmanların, yüksek deprem ivmesi nedeni ile hasar gördüğü ve binanın kullanılamaz hale geldiği gözlemlenebilir. Bu durum özellikle deprem sonrası hemen hizmet vermesi gereken kritik binalar için (ör. hastaneler, ulaşım ve haberleşme yapıları vb.) daha büyük önem taşımaktadır. Sağlık Bakanlığı bu bağlamda, 2013 yılında yayınladığı bir genelge ile, 1. ve 2. derece deprem bölgesindeki, 100 ve üzeri yatak kapasiteli tüm devlet hastanelerinde sismik izolatörler ile deprem yalıtımını zorunlu hale getirmiştir. Deprem yalıtımı, binaya etkiyen deprem ivmelerini dolayısı ile deprem kuvvetlerini çok büyük oranda sönümleyerek, sadece bina taşıyıcı siste- minin değil aynı zamanda diğer muhteviyatın (tesisatlar, ivmeye hassas cihazlar vb.) deprem sırasında korunmasını sağlamaktadır. Fakat bu azaltma deprem etkilerini tamamen yok et- mediği için tesisatlarda sismik koruma yapılmasına gerek olmadığı anlamına gelmemektedir. Bu bildiride, 18 Mart 2018, 30364 sayılı Resmi Gazete’de yayınlanarak, 1 Ocak 2019 tarihi itibari ile resmi olarak yürürlüğe giren Türkiye Bina Deprem Yönetmeliği’ne (TBDY) göre elektrik ve mekanik tesisatların sismik koruma hesabı tariflenmektedir. Ayrıca yine TBDY’e göre deprem yalıtımlı binalarda sismik koruma hesabı gereksinimi irdelenmektedir.
Out-Of Seismic Performance of Bed-Joint Reinforced Autoclaved Aerated Concrete (aac) Infill Walls Damaged Under Cyclic In-Plane Displacement Reversals
(Elsevier Sci Ltd, 2023) İlki, Alper; Demir, Uğur; Halıcı, Ömer Faruk; Zabbar, Yassin
The infill walls made of Autoclaved Aerated Concrete (AAC), which is a lightweight, fire resistant and energy efficient material, provide effective insulation solutions for building types of structures and becoming more and more popular in earthquake prone regions. Although the number of experimental tests examining the seismic response of clay brick infills is extensive, the amount of prior research on infill walls built of AAC blocks is rather limited. Past research revealed that the use of bed-joint reinforcement is one of the promising solutions to improve the global seismic response of masonry walls by enhancing strength and displacement capacity. In this study, the out-of-plane (OOP) seismic performance of AAC infill walls with flat-truss and innovative cord-type bed-joint reinforcement is experimentally evaluated. Also, consideration is given to the prior in-plane (IP) damage, which was found to degrade the seismic performance of infills in OOP direction. For this purpose, three IP and four OOP, in total, seven experimental tests were performed on four full-scale AAC infill wall specimens. The test parameters were selected in such a way as to make it possible to parametrically compare the OOP performance of AAC infills with flat-truss and cord-type bed-joint reinforcements with unreinforced AAC infill walls, together with the effect of prior IP damage on the OOP response of unreinforced AAC infill walls. It was found that the use of innovative cord-type bed-joint reinforcement improved the OOP strength to a similar extent to what was obtained from the truss-type reinforced specimen. In terms of ultimate displacement and energy dissipation capacity enhancement, the specimen with cord-type reinforcement performed better. In addition, the damages formed due to IP cyclic displacement reversals up to 0.005 drift ratio, which is defined as the drift limit for buildings with brittle infill walls in certain design codes, resulted in a significant reduction in the OOP strength and stiffness properties of AAC infills. The theoretical OOP strength calculations were found to provide unconservative strength values for the IP-damaged specimens.
Damage Accumulation Modelling of Two Reinforced Concrete Buildings Under Seismic Sequences
(Springer, 2023) Tönük, Gökçe; Oyguç, Reşat; Oyguç, Evrim; Uçak, Doruk
The extent of earthquake damage depends solely on the seismicity, site conditions and vulnerability of the building stock in a region. Hence, studies to assess the seismic behavior of building stocks with similar vulnerabilities are important to mitigate seismic risk in earthquake-prone regions. This study aims to simulate the seismic behavior of selected reinforced concrete (RC) school buildings by modelling damage accumulation under multiple earthquakes sequence. The observed data of two RC school buildings heavily damaged after the 2011 Van earthquake sequence in Turkey, namely, the Gedikbulak and Alakoy schools is used. Among these two school buildings, the Gedikbulak school building collapsed immediately after the main excitation, while the Alakoy school building withstood several seismic sequences, suffering heavy damages. In this study, three-dimensional numerical models that can consider the deterioration effects are developed and the capacities of the buildings were evaluated by conducting a force-based adaptive pushover procedure. Additionally, non-linear dynamic analyses were conducted using the concrete plastic damage model. Both degrading and conventional material models were used to examine the structural response under multiple ground motion sequences. The hysteretic behaviors of the studied buildings are presented. Consequently, analytical results are well correlated with the reconnaissance studies and neither of the considered structures are found to satisfy the design performance level.
State of the Art in Application of Seismic Isolation and Energy Dissipation in Turkey
(Springer International Publishing Ag, 2023) Şadan, Bahadır
This paper summarizes the passive structural control system applications and other related developments in Turkey, emphasizing the period between 2019 and 2022. The country hosts state-of-the-art seismic isolation applications, relatively greater in size, and use more isolators in each project (415 isolators per building on average) compared to the other seismic isolation projects worldwide. Construction of the world's largest seismic isolated building, Istanbul Basaksehir Pine and Sakura City Hospital, covering more than 1 million square meters of area and employing more than 2000 seismic isolators, was completed and has been in service since May 2020. 1915 Canakkale Bridge, constructed in memory of the great war of Canakkale during World War I, is now the world's longest suspension bridge with a 2023m main span length. Eight massive hydraulic dampers were used at the main deck and 48 at the approach viaducts in combination with 72 seismic isolators. Construction of a residential building complex in Istanbul consisting of 16 isolated blocks covering more than 170,000 m(2) area and having 454 seismic isolators is coming to an end very soon. Historical Nusretiye Clock Tower in Istanbul was relocated a few meters over seismic isolators. Historical Goztepe Railway Station in Istanbul was retrofitted to accommodate an additional railway line using seismic isolation technology. Seismic codes for buildings and bridges now include rules for the seismically isolated design of structures. Additionally, all seismic isolation designs must be peer-reviewed by law. A new seismic isolator testing facility was established in Eskisehir to respond to the demand for the large number of isolators that need to be tested.
Near-Fault Earthquake Ground Motion and Seismic Isolation Design
(Springer International Publishing Ag, 2023) Harmandar, Ebru; Erdik, Mustafa; Demircioglu-Tumsa, Mine B.; Şadan, Bahadır; Tuzun, Cuneyt; Ulker, Omer
Seismic isolation is one of the most reliable passive structural control techniques with adequately established standards for the earthquake protection of structures from earthquakes. However, it has been shown that the seismic isolation systems may not function the best for the near-fault ground motions, since in the proximity of a capable fault, the ground motions are significantly affected by the rupture mechanism and may generate high demands on the isolation system and the structure. In fact, several earthquake resistant design codes state that the seismically isolated structures located at near-fault sites should be designed by considering larger seismic demands than the demand on structures at far-field sites. When the fault ruptures in forward direction to the site most of the seismic energy arrives in coherent long-period ground velocity pulses. The ground-motion prediction equations (GMPEs) typically cannot account for such effects with limited distance metrics and lack adequate data at large magnitudes and near distances. For the reliable earthquake design of the isolated structure in near fault conditions that meets the performance objectives, the 3D design basis ground motion(s) need to be appropriately assessed. Measures in the design of the isolation system, such as modifications in the stiffness and damping characteristics, as well as in the limitation of vertical effects are needed. The behavior of the base-isolated buildings under near-fault (NF) ground motions with fling-step and forward-directivity characteristics are investigated with a rational assessment of design-basis near-fault ground motion, are investigated in a parametric format. The parametric study includes several variables, including the structural system flexibility; number of stories; isolation system characteristic (yield) strength, and the isolation periods related to the post-elastic stiffness. Furthermore, the effect of additional damping by viscous dampers were tested for some selected cases. Important findings observed from the parametric performance results and the overall conclusions of the study are provided.
Site Characterization for Site Response Analysis in Performance Based Approach
(Sipringer, 2022) Tönük, Gökçe; Ansal, Atilla
The local seismic hazard analysis would yield probabilistic uniform hazard acceleration response spectrum on the engineering bedrock outcrop. Thus, site-specific response analyses need to produce a probabilistic uniform hazard acceleration response spectrum on the ground surface. A possible performance based approach for this purpose requires a probabilistic estimation of soil stratification and engineering properties of encountered soil layers in the soil profile. The major uncertainties in site-specific response analysis arise from the variabilities of (a) local seismic hazard assessment, (b) selection and scaling of the hazard compatible input earthquake time histories, (c) soil stratification and engineering properties of encountered soil and rock layers, and (d) method of site response analysis. Even though the uncertainties related to first two items have primary importance on the outcome of the site-specific response analyses, the discussion in this article focuses on the observed variability and level of uncertainty in site conditions, related to soil stratification, thickness and type of encountered soil layers and their engineering properties, depth of ground water table and bedrock and properties of the engineering bedrock. Thus, one option may be conducting site response analyses for large number of soil profiles produced by Monte Carlo simulations for the investigated site to assess probabilistic performance based design acceleration spectra and acceleration time histories calculated on the ground surface based on 1D, 2D, or 3D site response analysis with respect to different performance levels.
Wireless Real-Time Monitoring System for Steam Cured Concrete Maturity Calculation
(IEEE, 2021) Bekmezci, İlker; Sürücü, Engin; Yıkıcı, Alper
Internet of Things (IoT) enabled LoRaWAN® system is adopted to monitor concrete temperatures in real-time via wireless devices embedded within concrete cover. Maturity method is employed to predict compressive strength development of steam cured precast concrete segments produced at an automated manufacturing plant using carousel system. The concrete segments embedded with IoT devices are exposed to steam curing in thermally insulated chambers and transferred to the evacuation line outside of the plant after being demolded. Real-time temperature measurements are continuously compared to predefined target values, so that an email notification could be send to production engineer. In this study, concrete temperatures as well as curing ambient temperatures for two different cases during segment manufacturing are successfully recorded. The details of IoT wireless system to estimate the strength of concrete are presented.
Factors Affecting Site-Specific Response Analysis
(Taylor and Francis, 2022) Tönük, Gökçe; Ansal, Atilla M.
The engineering purpose of a site-specific response analysis is to estimate the uniform hazard acceleration spectrum on the ground surface for a selected hazard level. One of the mandatory components for site response analyses is one or more representative acceleration time histories that need to be scaled with respect to the calculated seismic hazard level for the selected site. The selection and scaling procedures of earthquake acceleration records play an important role in this approach. The effects and differences in using two different scaling approaches are studied: scaling with respect to ground motion parameters and response spectrum scaling. A set of homogeneous ground motion prediction relationships are developed for peak ground acceleration, peak ground velocity, root-mean-square acceleration, Arias intensity, cumulative absolute velocity, maximum spectral acceleration, response spectrum intensity, and acceleration spectrum intensity based on a uniform set of acceleration records for ground motion parameter scaling. The uncertainties associated with site response analysis are considered as epistemic and aleatory uncertainties in source characteristics, soil profile, and soil properties. Aleatory variability is due to the intrinsic randomness of natural systems; it cannot be reduced with additional data (Passeri et al. 2020), however; its variability may be modeled by probability distribution functions. Thus, one possibility is to determine the probability distribution of the acceleration spectrum calculated on the ground surface for all possible input acceleration records, site profiles, and dynamic soil properties. The variability in the earthquake source and path effects are considered using a large number of acceleration records compatible with the site-dependent earthquake hazard in terms of fault mechanism, magnitude, and distance range recorded on stiff site conditions. Likewise, a large number of soil profiles may be considered to account for the site condition variability. The uncertainties related to dynamic soil properties may be considered as possible variability of maximum dynamic shear modulus in site response analyses. A methodology is proposed to estimate a uniform hazard acceleration spectrum on the ground surface based on the probabilistic assessment of the factors involved in site response analysis. The uniform hazard acceleration spectra obtained from a case study are compared with the spectra calculated by probabilistic models proposed in the literature.
Structural Assessment of the 13th Century Great Mosque and Hospital of Divrigi: a World Heritage Listed Structure
(12th International Conference on Structural Analysis of Historical Constructions (SAHC 2021), 2021) İlki, Alper; Berlucchi, Nicola; Demir, Cem; Şanver, Ali Naki; Hurata, Ali; Cömert, Mustafa; Halıcı, Ömer Faruk
The Great Mosque and Hospital of Divrigi is located in the central eastern partof Turkey, in Divrigi, Sivas. The historical facility consists of a monumental mosque anda two-story hospital, which are adjacent to each other. The structure dates back to13th century Mengujekids period and has been listed by the UNESCO as a World Heritagesince 1985. Great Mosque and Hospital of Divrigi is particularly notable for its monumentalstone portals that are decorated with three-dimensional ornaments carved fromstone. The structural system of the monument consists of multi-leaf stone masonrywalls and stone piers that support the roof structure which consists of stone and brickarches and vaults. The structure is located about 90 km away from the North AnatolianFault Line, that has been causing several destructive earthquakes. Consequently, thestructure is prone to destructive seismic activities. In this study, after a briefintroduction on the structural system and current condition of the structure, thestructural performance of the Great Mosque and Hospital of Divrigi is investigatedthrough site observations and structural analyses. For this purpose, linear and nonlinear 3Dfinite element models of the structure are developed and the structure is examined under theeffects of vertical loads and seismic actions. In the light of the analyses results,recommendations for potential interventions are outlined for further preservation of thestructure.
The Modified Post-Earthquake Damage Assessment Methodology for Tcip (tcip-Dam
(Springer, 2021) Cömert, Mustafa; Ilki, Alper; Halıcı, Ömer Faruk; Demir, Cem
Post-Earthquake damage assessment has always been one of the major challenges that both engineers and authorities face after disastrous earthquakes all around the world. Considering the number of buildings in need of inspection and the insufficient number of qualified inspectors, the availability of a thorough, quantitative and rapidly applicable damage assessment methodology is vitally important after such events. At the beginning of the new millennia, an assessment system satisfying these needs was developed for the Turkish Catastrophe Insurance Pool (TCIP, known as DASK in Turkey) to evaluate the damages in reinforced concrete (RC) and masonry structures. Since its enforcement, this assessment method has been successfully used after several earthquakes that took place in Turkey, such as 2011 Van Earthquake, 2011 Kutahya Earthquake, 2019 Istanbul Earthquake and 2020 Elazig Earthquake to decide the future of damaged structures to be either ‘repaired’ or ‘demolished’.
Performance of High-Damping Rubber Bearings for Seismic Isolation of Residential Buildings in Turkey
(Elsevier, 2021) Murota, N.; Tuzun, C.; Mori, T.; Şadan, Bahadır; Wakishima, K.; Suzuki, S.; Sutcu, F.; Erdik, M.
The applicability of high-damping rubber bearings for seismic isolation of residential buildings in Turkey is studied using numerical and experimental approaches. Seismic isolation system composed of high-damping rubber bearings is designed according to the recently updated Turkish Building Seismic Code-2018 (TBSC2018). Three model buildings of different height at assumed seismically active area are chosen from an actual building database, on which, equivalent lateral force procedure, and time history analyses are carried out. The seismic responses of the buildings are evaluated and the seismic isolation system's efficiency is confirmed. It is pointed out that the requirements in the new code in terms of the maximum allowable shear strain of elastomeric isolators are excessively conservative for those isolators with much larger capacity which is verified by sufficient test data, and as a result, designed isolator size becomes larger than necessary from a practical aspect. In order to verify the isolator design without compliance of shear strain limitation in the code, full-scale prototypes of high-damping rubber bearings are specially designed, developed and are subjected to dynamic loading test under test protocol specified in the code. The specific values of test conditions, such as compressive force, shear displacement and frequency, are developed referring several projects in Turkey. The results are comprehensively discussed and the applicability of high-damping rubber bearing for seismic isolation of residential buildings in Turkey is concluded with numerical and experimental approaches and a possible modification of TBSC2018 regarding maximum shear strain is proposed.
Gis-Based Assessment of Seismic Vulnerability Information of Old Masonry Buildings Using a Mobile Data Validation System
(American Society of Civil Engineers (ASCE), 2021) Özsoy Özbay, Ayşe Elif; Ünen, Hüseyin Can; Karapınar, Işıl Sanrı
This study proposes a geographic information system (GIS)–based rapid visual screening approach for seismic vulnerability assessment of masonry buildings in culturally and architecturally important historical regions. Through the application of the proposed methodology, a prioritization strategy for seismic vulnerability assessment of the heritage masonry buildings in Galata, a historical center of Istanbul, Turkey, was performed. This approach is based on an integrated methodology including a data collection process conducted through visual inspections and standard survey forms filled on site, generation of a georeferenced building database enabling the calculations and mapping of the vulnerability scores, and camera-based data validation process. The validation process provides an online collaborative mobile mapping system through georeferenced images gathered from the field. By the updatable data validation process, the reliability and efficiency of the GIS-based building database are enhanced by minimizing the errors during the visual screening and the cost of data correction due to reinspection is reduced.

Browse

Recent Submissions